Boron-based fertilizer

Claimed function: Straight inorganic micronutrient fertiliser PFC 1(C)(II)(a)

Active ingredient: Boron (B) – 24 % (as Boron Citrate)

The form of product: water-solube concentrate (SL)

Contains: aliphatic acid, boric acid, isodecanol, ethoxylated other ingredients.

For professional use. To avoid risks to human health and environment, it is mandatory to use the product according to the instructions of use. Read the product instructions before using the product!

Causes severe skin burns and eye damage. May cause respiratory irritation. May damage fertility. May damage the unborn child. Keep out of reach of children. Obtain special instructions before use. P Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor. Dispose of contents/container to in accordance with local/regional/national/international regulations.

UFI: E6V3-904P-N00X-KJ8K

Application rates:  Dilute 300 – 500 ml of product in 200 L of water (rate per hectare) and spray onto plant leaves, ideally in the early morning or late afternoon to avoid direct sunlight. For more specific information scan QR code.

Storage: Keep the product in its original packaging in a well ventilated area, no lower than 0°C and no more than +40°C temperature,  away from food, drink, animal feed, electricity, heat sources and direct sunlight.

Boron-based fertilizer

This product is designed for use as a foliar-applied fertilizer to supply boron (B) to crops and also adjusts the pH of the spraying solution. 

It is intended to correct boron deficiencies in a wide range of agricultural and horticultural crops, including but not limited to fruits, vegetables, and cereals. Boron plays a crucial role in plant growth, particularly in the formation of cell walls, flowering, fruit setting, and the prevention of premature fruit drop.

The pH adjustment function is particularly beneficial when preparing spray tank mixes, as it helps to bring the solution into the optimal pH range for nutrient stability and foliar absorption. Many agrochemical and micronutrient formulations perform best in slightly acidic conditions (typically pH 5.5 to 6.5), and this product is formulated to buffer the spray solution accordingly.

EN | Use recommendations. 

Foliar Application: Dilute 300 – 500 ml of product in 200 L of water (rate per hectare) and spray onto plant leaves, ideally in the early morning or late afternoon to avoid direct sunlight. 

Note. FOCUS ON VISUAL COLOR CHANGES.

Frequency: Apply Boron pH fertilizer with each foliar spraying during the growing season, depending on crop type and soil boron levels.

Tank mix preparation. SHAKE WELL BEFORE USE! Mix thoroughly and spray the solution within 24 hours of preparation.

Note. If in doubt, it is recommended to check the compatibility of all mixed products (for residues, layering, etc.) in advance in a small container (min. 500 ml capacity). When mixing, follow the products’ proportions.

First aid. If feeling unwell: consult a physician immediately and show this label. If on skin: immediately

remove contaminated clothes, wash skin with water and soap, provide medical treatment if skin irritation persists. If in eyes: rinse eyes with flow of running water for 10 – 30 minutes and immediately consult a physician. If inhaled: injured person must be taken outside for fresh air immediately. Immediately consult a physician. If swallowed: rinse out the mouth with water and provide 2 – 5 dL of water. Do not induce vomiting without first consulting a physician. Immediately consult a physician.

Disposal of empty packaging. Rinse the empty packaging with water three times, collect the used water and spray it out on the fields. Dispose of empty packaging and product residues according to local regulations. Do not use the packaging for other purposes.

Warranty requirements. The manufacturer guarantees the quality of the product if it was received in its original packaging and was stored and used appropriately. The manufacturer is not responsible for losses due to factors which the manufacturer cannot control (e.g. extreme weather conditions). All product usage recommendations are based on the manufacturer’s current experience.

Manufacturer:

UAB Nando

H. ir O. Minkovskių g. 152

LT-46244 Kaunas, Lithuania

Tel. +370 37 441891, info@nando.lt

www.nando.lt