Sulfur-based Fertilizer

Claimed function: Straight liquid inorganic macronutrient fertiliser PFC 1(C)(I)(b)(i)

The form of product: water-soluble concentrate (SL)

Active ingredient:  sulphur trioxide (SO3) -7,5% (80 g/L)

Contains: fatty alcohol ethoxylate, sulphuric acid, isotridecanol, ethoxylated other ingredients

For professional use. To avoid risks to human health and environment, it is mandatory to use the product according to the instructions of use. Read the product instructions before using the product!

Causes severe skin burns and eye damage. Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Dispose of contents/container to in accordance with local/regional/national/international regulations.  

                  DANGER

UFI: RK80-90UM-G00K-NRQQ

Application rates:

Foliar Application: Dilute 100 – 200 ml of product  in 100 L of water and spray onto plant leaves, ideally in the early morning or late afternoon to avoid direct sunlight.
Frequency: Apply Lignum S fertilizer with each foliar spraying during the growing season, based on crop needs and soil/tissue sulfur analysis.For more specific information scan QR code.

Storage. Keep the product in its original packaging in a well ventilated area, no lower than 0°C and no more than +40°C temperature, away from food, drink, animal feed, electricity, heat sources and direct sunlight. 

Sulfur-based Fertilizer

  • Provides readily available sulfur to support crop health and quality
  • Enhances nitrogen use efficiency and protein synthesis
  • Improves crop resistance to stress and disease
  • Supports strong vegetative growth and optimal yield potential
  • Compatible with other fertilizers for convenient tank mixing
  • Liquid formulation ensures easy handling and uniform application
  • Adjusts spray solution pH for optimal nutrient stability and foliar absorption
  • Improves agrochemical performance by buffering pH
  • Advanced formulation with adjuvants to reduce surface tension and enhance leaf coverage, ensuring optimal spreading, adhesion, and penetration.

EN | Use recommendations. 

Foliar Application: Dilute 100 – 200 ml of product  in 100 L of water and spray onto plant leaves, ideally in the early morning or late afternoon to avoid direct sunlight.

Field crops and vegetablesRecommended concentration for most cases is 0.1% – 0.2%, i.e. 100 ml – 200 ml/100 L of water. The maximum concentration is 300 ml/100 L of water
Gardens 100 ml for every 100 L of water, water volume at least 400 L/ha

Note. Due to the product’s low pH (pH 2), users must check the pH of the prepared solution. The optimal pH range for most applications is 5.5–6.5. The specific application rate may differ as it depends on water salinity, suspended solids and specific tank mix agrochemical products which significantly affect the pH value (e.g. boron ethanolamine a.i. in the case of boron fertilizers).

Tank mix preparation. SHAKE WELL BEFORE USE! Prepare the tank mix according to the plant protection and microelement fertilizer manufacturer’s recommendations with 3/4 of the total water. Then add LIGNUM S and the required amount of remaining water (1/4 of the total) into the tank mix, stirring gently as LIGNUM S and water are added. Spray the solution within 24 hours of preparation.

Note. If in doubt, it is recommended to check the compatibility of all mixed products (for residues, layering, etc.) in advance in a small container (min. 500 ml capacity). When mixing, follow the products’ proportions.

First aid. If feeling unwell: consult a physician immediately and show this label. If on skin: immediately

remove contaminated clothes, wash skin with water and soap, provide medical treatment if skin irritation persists. If in eyes: rinse eyes with flow of running water for 10 – 30 minutes and immediately consult a physician. If inhaled: injured persons must be taken outside for fresh air immediately. Immediately consult a physician. If swallowed: rinse out the mouth with water and provide 2 – 5 dL of water. Do not induce vomiting without first consulting a physician. Immediately consult a physician.

Disposal of empty packaging. Rinse the empty packaging with water three times, collect the used water and spray it out on the fields. Dispose of empty packaging and product residues according to local regulations. Do not use the packaging for other purposes.

Storage. Keep the product in its original packaging in a well ventilated area, no lower than 0°C and no more than +40°C temperature, out of the reach of children, away from food, drink, animal feed, electricity, heat sources and direct sunlight. Product may be stored for up to 2 years if kept in its original unopened packaging.

Warranty requirements. The manufacturer guarantees the quality of the product if it was received in its original packaging and was stored and used appropriately. The manufacturer is not responsible for losses due to factors which the manufacturer cannot control (e.g. extreme weather conditions). All product usage recommendations are based on the manufacturer’s current experience.

Manufacturer:

UAB Nando

H. ir O. Minkovskių g. 152

LT-46244 Kaunas, Lithuania

Tel. +370 37 441891, info@nando.lt 

www.nando.lt