S-power

EN | Sulfur-based Fertilizer

Claimed function: Straight liquid inorganic macronutrient fertiliser PFC 1(C)(I)(b)(i)

The form of product: water-soluble concentrate (SL)

Active ingredient:  Sulphur trioxide (SO₃) -18% (227 g/L)

Contains: sulphuric acid,  citric acid, alcohols, C9-11, ethoxylated propoxylated, other ingredients

For professional use. To avoid risks to human health and environment, it is mandatory to use the product according to the instructions of use. read the product instructions before using the product!

Causes severe skin burns and eye damage. May cause respiratory irritation. Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor. Dispose of contents/container to in accordance with local/regional/national/international regulations.

                  DANGER

UFI: Y000-P0TW-V003-GMF8

Application rates:

Foliar Application: Dilute 40 – 100 ml of product  in 100 L of water and spray onto plant leaves, ideally in the early morning or late afternoon to avoid direct sunlight.
Frequency: Apply S – Power fertilizer with each foliar spraying during the growing season, based on crop needs and soil/tissue sulfur analysis.

Storage. Keep the product in its original packaging in a well ventilated area, no lower than 0°C and no more than +40°C temperature, away from food, drink, animal feed, electricity, heat sources and direct sunlight.

Shelf life: 24  months

Manufacturer:

UAB Nando

H. ir O. Minkovskių g. 152

LT-46244 Kaunas, Lithuania

Tel. +370 37 441891, info@nando.lt 

www.nando.lt

Sulfur-based Fertilizer

• Supplies essential sulfur (S) for healthy plant growth, flowering, and fruit development
• Corrects sulfur deficiencies in fruits, vegetables, cereals, and other crops
• Advanced formulation with adjuvants to reduce surface tension and enhance leaf coverage, ensuring optimal spreading, adhesion, and penetration.
• Adjusts spray solution pH for optimal nutrient stability and foliar absorption
• Improves agrochemical performance by buffering pH to the ideal 5.5–6.5 range
• Built-in pH colour indicator for easy visual monitoring of water acidity:

Use recommendations. 

Foliar Application: Dilute 40 – 100 ml of product  in 100 L of water and spray onto plant leaves, ideally in the early morning or late afternoon to avoid direct sunlight.

Frequency: Apply S – Power fertilizer with each foliar spraying during the growing season, based on crop needs and soil/tissue sulfur analysis.

Note. Due to the product’s low pH (pH 1), users must check the pH of the prepared solution. The optimal pH range for most applications is 5.5–6.5. The specific application rate may differ as it depends on water salinity, suspended solids and specific tank mix agrochemical products which significantly affect the pH value (e.g. boron ethanolamine a.i. in the case of boron fertilizers).

Tank mix preparation. SHAKE WELL BEFORE USE! Add 9/10 of the required volume of water to the sprayer tank. With mixing on, add the calculated amount of S-Power. Add plant protection products, other micronutrient fertilizers, adjuvants in accordance with the manufacturer’s recommendations and the remaining amount of water (1/10 of the total amount). Mix thoroughly and spray the solution within 24 hours of preparation.

First aid. If feeling unwell: consult a physician immediately and show this label. If on skin: immediately

remove contaminated clothes, wash skin with water and soap, provide medical treatment if skin irritation persists. If in eyes: rinse eyes with flow of running water for 10 – 30 minutes and immediately consult a physician. If inhaled: injured persons must be taken outside for fresh air immediately. Immediately consult a physician. If swallowed: rinse out the mouth with water and provide 2 – 5 dL of water. Do not induce vomiting without first consulting a physician. Immediately consult a physician.

Disposal of empty packaging. Rinse the empty packaging with water three times, collect the used water and spray it out on the fields. Dispose of empty packaging and product residues according to local regulations. Do not use the packaging for other purposes.

Storage. Keep the product in its original packaging in a well ventilated area, no lower than 0°C and no more than +40°C temperature, out of the reach of children, away from food, drink, animal feed, electricity, heat sources and direct sunlight. Product may be stored for up to 2 years if kept in its original unopened packaging.

Warranty requirements. The manufacturer guarantees the quality of the product if it was received in its original packaging and was stored and used appropriately. The manufacturer is not responsible for losses due to factors which the manufacturer cannot control (e.g. extreme weather conditions). All product usage recommendations are based on the manufacturer’s current experience.